Spare Parts

Parts for all current models are listed. If you need parts for a discontinued kite, send Will an email

For each part, select the model of kite from the drop down list. The parts list for each kite can be found under Support.

Spars

Upper Leading Edge

Upper leading edges come marked for the Upper Spreader C-clip and with the ferrule glued in place.

Lower Leading Edge

Lower leading edges come marked for the C-clip at the lower leading edge connector.

Standoffs - $12

Standoffs come as a full set of 4 pre cut rods with JACO connectors, vinyl end caps, and o-rings.

Upper Spreader - $4

Upper spreader sized to fit specified kite

Lower Spreader

Includes lower spreader with standoff connectors and for Nitro tubes the adapter. All fittings are in place. M spreaders include the ferrule.

Spine - $8.00

Spine comes marked for Center Tee fittings

Fittings

Upper Leading Edge connector - $0.90

APA leading edge connector sized to fit the specified kite

Lower Leading Edge connector - $0.90

APA leading edge connector sized to fit the specified kite

Yoyo Stopper - $1.50

R-sky style hard yoyo stopper drilled to fit the specified kite

Center Tee - $2.5

R-sky style center tee 6mmx7mm. Fits all Sturdy Designs sport kites.

Tip Nock - $1.00

HQ tip nock drilled to fit the specified kite. Includes tension line.

C-clip - $0.75

Use 6mm for tapered spars, 7mm for non tapered.

Bridles

Bridle for the specified kite ready for install.